Horizontal Press - Cold Metals Lab

Horizontal Press

Max. Material Thickness: 1/2" Harden Steel
Max. Material Width: 6"

Machine TitleHorizontal Hydraulic Press
SafetyKeep fingers away from the press, do not hold material while pressing
Machine PurposeBend 6 inch sheet stock, press components together
Training necessaryMetal Fabrication Training
Material LimitationsNo thicker than 1/4" and shop staff must be present when changing tooling
Working Dimensions8-inch travel
AccessoriesPress dies for angle bends and radii
Software or File TypeN/A
ToolingDifferent press heads
NotesPowered by ironworker

    • Edwards Horizontal Press Manual

© mHUB 2024. Powered by PeopleVine. Terms of use | Privacy Policy | Cookie Policy