Cold Metals Lab

---

Search For: Category Select a Category Tormach CNC's

• [Cold Metals] General Information Cold Metals Lab Cold Metals:
  Where we turn stock into chips
  
  View
• Corner Notcher Cold Metals Lab Hand-Operated
  Max. Thickness: 14 Gauge
  Max. Cut Length: 5"
  
  View
• Drill Bit Sharpener Cold Metals Lab 3/32" to 3/4" bits
  115 to 140 degrees
  split tip grind guide
  

  Web

  View Website

  View
• Drill Press Cold Metals Lab Table Swing 20"
  1 HP
  9 speed settings 150-2200 RPM
  25.5" Draw
  5" spindle travel
  13" x 15" table
  
  View
• Enco Knee Mill Cold Metals Lab 42" x 9" bed
  X-Axis Power Feed
  XYZ Digital Read Out
  
  View
• Finger Brake Cold Metals Lab Quickly bend straight sheet metal forms
  
  View
• Horizontal Band Saw Cold Metals Lab No material less then 1/2" thick
  No Wood
  10" height max 18" wide
  4 setting 80-330 SFM
  

  Web

  View Website

  View
• Horizontal Press Cold Metals Lab Max. Material Thickness: 1/2" Harden Steel
  Max. Material Width: 6"
  
  View
• Hydraulic Iron Worker Cold Metals Lab Min. Punch Daimeter: 3/16"
  Max. Punch Diameter: 1" 1/16"
  Angle Iron Sheer
  Max. Flat Sheer Material Thickness: 1/2"
  Notcher
  
  View
• Hydraulic Shear Cold Metals Lab Max. Width: 48"
  Max. Thickness 12 Gauge
  
  View
• Hydraulic Shop Press Cold Metals Lab 40ton Pressure
  36" Brake
  Max. Thickness: 1/2"
  
  View
• Hydraulic Tube Bender Cold Metals Lab 10 ton Bending Pressure
  Interchangeable Dies
  
  View
• Tapping Arm Cold Metals Lab Tap from #4- 1/2"
  40" swing
  Reaming & Deburring
  
  View
• Tormach 1100M Tormach CNC's 18" x 11" working area
  2HP
  110 IPM
  7500 RPM
  12 ATC
  ETS tool setter
  flood/mist/air coolant and chip evac
  

  Web

  View Website

  View
• Tormach 15L Slant Pro Lathe Tormach CNC's 6.2" swing over carriage
  3HP
  100-3500 RPM
  8 ATC/3 gang plate/quick change tool post
  automatic collet closer
  bar puller
  rigid tapping
  5C or 6" chuck
  

  Web

  View Website

  View
• Tormach PCNC1100 Tormach CNC's 18" x 9.5" working area
  1.5 HP
  110 IPM
  5100 RPM
  10 ATC
  ETS tool setter
  flood/mist/air coolant and chip evac
  

  Web

  View Website

  View
• Vertical Band Saw Cold Metals Lab .25" or less stock
  20” x 20” Bed Size
  Tilt deg: 8 F & B, 12 L & 15 R
  82-330 SFM
  
  View